{"id":13914,"date":"2024-03-08T17:08:28","date_gmt":"2024-03-08T16:08:28","guid":{"rendered":"https:\/\/www.stirepair.com\/?page_id=13914"},"modified":"2026-03-18T16:05:09","modified_gmt":"2026-03-18T15:05:09","slug":"aurora_power_one_string_error_codes","status":"publish","type":"page","link":"https:\/\/stirepair.com\/en\/aurora_power_one_string_error_codes\/","title":{"rendered":"Aurora Power One String Error Codes"},"content":{"rendered":"\t\t<div data-elementor-type=\"wp-page\" data-elementor-id=\"13914\" class=\"elementor elementor-13914 elementor-13913\" data-elementor-post-type=\"page\">\n\t\t\t\t\t\t<section class=\"elementor-section elementor-top-section elementor-element elementor-element-ddc88db elementor-section-boxed elementor-section-height-default elementor-section-height-default\" data-id=\"ddc88db\" data-element_type=\"section\" data-e-type=\"section\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t\t\t\t<div class=\"elementor-background-overlay\"><\/div>\n\t\t\t\t\t\t\t<div class=\"elementor-container elementor-column-gap-default\">\n\t\t\t\t\t<div class=\"elementor-column elementor-col-100 elementor-top-column elementor-element elementor-element-209ed1f\" data-id=\"209ed1f\" data-element_type=\"column\" data-e-type=\"column\">\n\t\t\t<div class=\"elementor-widget-wrap elementor-element-populated\">\n\t\t\t\t\t\t<section class=\"elementor-section elementor-inner-section elementor-element elementor-element-eeb6020 elementor-section-boxed elementor-section-height-default elementor-section-height-default\" data-id=\"eeb6020\" data-element_type=\"section\" data-e-type=\"section\">\n\t\t\t\t\t\t<div class=\"elementor-container elementor-column-gap-default\">\n\t\t\t\t\t<div class=\"elementor-column elementor-col-50 elementor-inner-column elementor-element elementor-element-1fbdf17\" data-id=\"1fbdf17\" data-element_type=\"column\" data-e-type=\"column\">\n\t\t\t<div class=\"elementor-widget-wrap elementor-element-populated\">\n\t\t\t\t\t\t<div class=\"elementor-element elementor-element-3119858 elementor-widget-mobile__width-initial elementor-invisible elementor-widget elementor-widget-image\" data-id=\"3119858\" data-element_type=\"widget\" data-e-type=\"widget\" data-settings=\"{&quot;_animation&quot;:&quot;zoomIn&quot;}\" data-widget_type=\"image.default\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<img fetchpriority=\"high\" decoding=\"async\" width=\"389\" height=\"670\" src=\"https:\/\/stirepair.com\/wp-content\/uploads\/2024\/03\/Aurora_Power_One_Stringa.webp\" class=\"elementor-animation-grow attachment-large size-large wp-image-14191\" alt=\"Inverter Aurora Power One String\" \/>\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t<div class=\"elementor-column elementor-col-50 elementor-inner-column elementor-element elementor-element-f5b9b7b\" data-id=\"f5b9b7b\" data-element_type=\"column\" data-e-type=\"column\">\n\t\t\t<div class=\"elementor-widget-wrap elementor-element-populated\">\n\t\t\t\t\t\t<div class=\"elementor-element elementor-element-559760d elementor-widget__width-initial elementor-invisible elementor-widget elementor-widget-heading\" data-id=\"559760d\" data-element_type=\"widget\" data-e-type=\"widget\" data-settings=\"{&quot;_animation&quot;:&quot;bounceIn&quot;,&quot;_animation_delay&quot;:900}\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">\u2713 PVI 3.0<br>\u2713 PVI 3.6<br>\u2713 PVI 4.2<br>\u2713 PVI 5000<br>\u2713 PVI 6000<br>\u2713 PVI 10.0<br>\u2713 PVI 12.5<br>\u2713 TRIO 5.8<br>\u2713 TRIO 7.5<br>\u2713 TRIO 8.5<br>\u2713 TRIO 20.0<br>\u2713 TRIO 27.6<\/h2>\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<section class=\"elementor-section elementor-top-section elementor-element elementor-element-0a4b7b9 elementor-section-height-min-height elementor-section-items-bottom elementor-section-content-bottom elementor-section-boxed elementor-section-height-default\" data-id=\"0a4b7b9\" data-element_type=\"section\" data-e-type=\"section\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t\t\t\t<div class=\"elementor-background-overlay\"><\/div>\n\t\t\t\t\t\t\t<div class=\"elementor-container elementor-column-gap-default\">\n\t\t\t\t\t<div class=\"elementor-column elementor-col-100 elementor-top-column elementor-element elementor-element-b13f234\" data-id=\"b13f234\" data-element_type=\"column\" data-e-type=\"column\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t<div class=\"elementor-widget-wrap elementor-element-populated\">\n\t\t\t\t\t<div class=\"elementor-background-overlay\"><\/div>\n\t\t\t\t\t\t<div class=\"elementor-element elementor-element-7a5b297 elementor-invisible elementor-widget elementor-widget-elementskit-heading\" data-id=\"7a5b297\" data-element_type=\"widget\" data-e-type=\"widget\" data-settings=\"{&quot;_animation&quot;:&quot;zoomIn&quot;,&quot;_animation_tablet&quot;:&quot;zoomIn&quot;,&quot;_animation_mobile&quot;:&quot;zoomIn&quot;}\" data-widget_type=\"elementskit-heading.default\">\n\t\t\t\t\t<div class=\"ekit-wid-con\" ><div class=\"ekit-heading elementskit-section-title-wraper text_left   ekit_heading_tablet-   ekit_heading_mobile-\"><h1 class=\"ekit-heading--title elementskit-section-title \">POWER ONE STRING<\/h1><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-2c726b2 elementor-icon-list--layout-inline elementor-align-start elementor-list-item-link-full_width elementor-widget elementor-widget-icon-list\" data-id=\"2c726b2\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"icon-list.default\">\n\t\t\t\t\t\t\t<ul class=\"elementor-icon-list-items elementor-inline-items\">\n\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item elementor-inline-item\">\n\t\t\t\t\t\t\t\t\t\t\t<a href=\"https:\/\/stirepair.com\/sti_repair\/\">\n\n\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\">Home<\/span>\n\t\t\t\t\t\t\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item elementor-inline-item\">\n\t\t\t\t\t\t\t\t\t\t\t<a href=\"https:\/\/stirepair.com\/riparazione-inverter\/\">\n\n\t\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<i aria-hidden=\"true\" class=\"fas fa-chevron-right\"><\/i>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\">Error Code<\/span>\n\t\t\t\t\t\t\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item elementor-inline-item\">\n\t\t\t\t\t\t\t\t\t\t\t<a href=\"https:\/\/stirepair.com\/codici_errore\/\">\n\n\t\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<i aria-hidden=\"true\" class=\"fas fa-chevron-right\"><\/i>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\">Photovoltaic<\/span>\n\t\t\t\t\t\t\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t<li class=\"elementor-icon-list-item elementor-inline-item\">\n\t\t\t\t\t\t\t\t\t\t\t<a href=\"#\">\n\n\t\t\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-icon\">\n\t\t\t\t\t\t\t<i aria-hidden=\"true\" class=\"fas fa-chevron-right\"><\/i>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"elementor-icon-list-text\">Aurora Power One String<\/span>\n\t\t\t\t\t\t\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<section class=\"elementor-section elementor-top-section elementor-element elementor-element-21ceb04 elementor-section-boxed elementor-section-height-default elementor-section-height-default\" data-id=\"21ceb04\" data-element_type=\"section\" data-e-type=\"section\">\n\t\t\t\t\t\t<div class=\"elementor-container elementor-column-gap-default\">\n\t\t\t\t\t<div class=\"elementor-column elementor-col-100 elementor-top-column elementor-element elementor-element-8246b3d elementor-invisible\" data-id=\"8246b3d\" data-element_type=\"column\" data-e-type=\"column\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;,&quot;animation&quot;:&quot;fadeInDown&quot;,&quot;animation_mobile&quot;:&quot;none&quot;}\">\n\t\t\t<div class=\"elementor-widget-wrap elementor-element-populated\">\n\t\t\t\t\t<div class=\"elementor-background-overlay\"><\/div>\n\t\t\t\t\t\t<div class=\"elementor-element elementor-element-3822bb3 elementor-widget elementor-widget-text-editor\" data-id=\"3822bb3\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Listed below are the requirements for initial action on a failed inverter. Before proceeding with any operation: A) Verify that the model is correct; B) Carefully follow all instructions provided in the manufacturer&#8217;s operation and maintenance manual; C) Ensure that the intervention is carried out by trained personnel; D) Since this is a photovoltaic inverter with a DC input that is always live, <strong>strictly observe all applicable safety regulations<\/strong>.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<section class=\"elementor-section elementor-top-section elementor-element elementor-element-13d4dea elementor-section-boxed elementor-section-height-default elementor-section-height-default\" data-id=\"13d4dea\" data-element_type=\"section\" data-e-type=\"section\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t\t\t<div class=\"elementor-container elementor-column-gap-default\">\n\t\t\t\t\t<div class=\"elementor-column elementor-col-100 elementor-top-column elementor-element elementor-element-a60dfd7\" data-id=\"a60dfd7\" data-element_type=\"column\" data-e-type=\"column\">\n\t\t\t<div class=\"elementor-widget-wrap elementor-element-populated\">\n\t\t\t\t\t\t<div class=\"elementor-element elementor-element-a58768c elementor-invisible elementor-widget elementor-widget-elementskit-heading\" data-id=\"a58768c\" data-element_type=\"widget\" data-e-type=\"widget\" data-settings=\"{&quot;_animation&quot;:&quot;zoomIn&quot;,&quot;_animation_tablet&quot;:&quot;fadeInLeft&quot;,&quot;_animation_mobile&quot;:&quot;zoomIn&quot;}\" data-widget_type=\"elementskit-heading.default\">\n\t\t\t\t\t<div class=\"ekit-wid-con\" ><div class=\"ekit-heading elementskit-section-title-wraper text_center   ekit_heading_tablet-   ekit_heading_mobile-\"><h2 class=\"ekit-heading--title elementskit-section-title \">Alarms, Errors and Warnings<\/h2><\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-862e963 elementor-widget-divider--view-line elementor-widget elementor-widget-divider\" data-id=\"862e963\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"divider.default\">\n\t\t\t\t\t\t\t<div class=\"elementor-divider\">\n\t\t\t<span class=\"elementor-divider-separator\">\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<section class=\"elementor-section elementor-top-section elementor-element elementor-element-e9759fd elementor-section-boxed elementor-section-height-default elementor-section-height-default\" data-id=\"e9759fd\" data-element_type=\"section\" data-e-type=\"section\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t\t\t<div class=\"elementor-container elementor-column-gap-default\">\n\t\t\t\t\t<div class=\"elementor-column elementor-col-100 elementor-top-column elementor-element elementor-element-691ce16\" data-id=\"691ce16\" data-element_type=\"column\" data-e-type=\"column\">\n\t\t\t<div class=\"elementor-widget-wrap elementor-element-populated\">\n\t\t\t\t\t\t<section class=\"elementor-section elementor-inner-section elementor-element elementor-element-7fe093f elementor-section-boxed elementor-section-height-default elementor-section-height-default\" data-id=\"7fe093f\" data-element_type=\"section\" data-e-type=\"section\">\n\t\t\t\t\t\t<div class=\"elementor-container elementor-column-gap-default\">\n\t\t\t\t\t<div class=\"elementor-column elementor-col-100 elementor-inner-column elementor-element elementor-element-4a67a4b\" data-id=\"4a67a4b\" data-element_type=\"column\" data-e-type=\"column\">\n\t\t\t<div class=\"elementor-widget-wrap elementor-element-populated\">\n\t\t\t\t\t\t<div class=\"elementor-element elementor-element-42570ce elementor-widget elementor-widget-elementskit-table\" data-id=\"42570ce\" data-element_type=\"widget\" data-e-type=\"widget\" data-settings=\"{&quot;search_placeholder&quot;:&quot;Type Here To Search...&quot;,&quot;info_text&quot;:&quot;Showing _START_ to _END_ of _TOTAL_ entries&quot;,&quot;entries_text&quot;:&quot;Show _MENU_ entries&quot;}\" data-widget_type=\"elementskit-table.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t<div class=\"ekit-wid-con\" >\n<div class=\"ekit_table display  ekit_table_data_type-custom\"\n\tdata-settings=\"{&quot;fixedHeader&quot;:false,&quot;search&quot;:true,&quot;search_placeholder&quot;:&quot;Type Here To Search...&quot;,&quot;responsive&quot;:true,&quot;pagination&quot;:true,&quot;button&quot;:false,&quot;entries&quot;:true,&quot;info&quot;:true,&quot;info_text&quot;:&quot;Showing _START_ to _END_ of _TOTAL_ entries&quot;,&quot;entries_text&quot;:&quot;Show _MENU_ entries&quot;,&quot;ordering&quot;:true,&quot;searchIcon&quot;:&quot;&lt;i aria-hidden=\\&quot;true\\&quot; class=\\&quot;fa fa-search\\&quot;&gt;&lt;\\\/i&gt;&quot;,&quot;item_per_page&quot;:10,&quot;nav_style&quot;:&quot;both&quot;,&quot;prev_text&quot;:&quot;Prev&quot;,&quot;next_text&quot;:&quot;Next&quot;,&quot;prev_arrow&quot;:&quot;fas fa-long-arrow-alt-left&quot;,&quot;next_arrow&quot;:&quot;fas fa-long-arrow-alt-right&quot;}\">\n\t<table id=\"ekit-table-container-42570ce\" class=\"display dataTable\" style=\"width:100%\"><thead><tr>\t<th class=\"elementor-repeater-item-a90a945\">\n\t\t<div\n\t\t\tclass=\"ekit_table_item_container  ekit-table-container- \">\n\t\t\tCodice errore a display\t\t<\/div>\n\t<\/th>\n\t\t<th class=\"elementor-repeater-item-6904dd6\">\n\t\t<div\n\t\t\tclass=\"ekit_table_item_container  ekit-table-container- \">\n\t\t\tMessaggio di errore\t\t<\/div>\n\t<\/th>\n\t\t<th class=\"elementor-repeater-item-1a183bb\">\n\t\t<div\n\t\t\tclass=\"ekit_table_item_container  ekit-table-container- \">\n\t\t\tSegnalazione\t\t<\/div>\n\t<\/th>\n\t\t<th class=\"elementor-repeater-item-12b0242\">\n\t\t<div\n\t\t\tclass=\"ekit_table_item_container  ekit-table-container- \">\n\t\t\tNome allarme e causa\t\t<\/div>\n\t<\/th>\n\t\t<th class=\"elementor-repeater-item-1bc80a0\">\n\t\t<div\n\t\t\tclass=\"ekit_table_item_container  ekit-table-container- \">\n\t\t\tPossibile soluzione\t\t<\/div>\n\t<\/th>\n\t <\/tr><\/thead><tbody><tr>\t<td data-order=\"No code\"\n\t\tclass=\"elementor-repeater-item-bc99b79 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>No code<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Ground F\"\n\t\tclass=\"elementor-repeater-item-c81282d ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Ground F<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Red led\"\n\t\tclass=\"elementor-repeater-item-dc4e675 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Red led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"PV generator ground fault:The alarm is generated when anground fault current is detected in the DC section of the system.\"\n\t\tclass=\"elementor-repeater-item-b4144a0 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>PV generator ground fault:<\/strong><br \/>The alarm is generated when an<br \/>ground fault current is detected in the DC section of the system.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Make an insulation resistance measurement usinga megohmeter placed between the PV array (terminalpositive shorted to the negative pole) versus ground. Themeasurement is strongly influenced by environmental conditions soshould be made under the same conditions under which the error hasoccurred.- Should the measured value be less than 1megaohma check by a technician\/installer should be made on thePV generator to locate and eliminate the problem.- Should the measured value be greater than 1megaohmand the error report continues to be present, contactthe Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-c03bd9a ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Make an insulation resistance measurement using<br \/>a megohmeter placed between the PV array (terminal<br \/>positive shorted to the negative pole) versus ground. The<br \/>measurement is strongly influenced by environmental conditions so<br \/>should be made under the same conditions under which the error has<br \/>occurred.<br \/>- Should the measured value be less than 1megaohm<br \/>a check by a technician\/installer should be made on the<br \/>PV generator to locate and eliminate the problem.<br \/>- Should the measured value be greater than 1megaohm<br \/>and the error report continues to be present, contact<br \/>the Service STI Repair. <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"No code\"\n\t\tclass=\"elementor-repeater-item-ec5173f ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>No code<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"NEW COMPONENT REJECTED!\"\n\t\tclass=\"elementor-repeater-item-e51bf3a ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>NEW COMPONENT REJECTED!<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Led yellow Lamp.\"\n\t\tclass=\"elementor-repeater-item-3f46a86 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Led yellow Lamp.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Failure to associate the new component:The inverter's internal components (e.g., display, fuse board,communication and control board, etc...) are notassociated with each other. This condition occursfollowing the replacement of one of the internal componentsto the inverter.\"\n\t\tclass=\"elementor-repeater-item-d77ab19 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Failure to associate the new component:<\/strong><br \/>The inverter's internal components (e.g., display, fuse board,<br \/>communication and control board, etc...) are not<br \/>associated with each other. This condition occurs<br \/>following the replacement of one of the internal components<br \/>to the inverter. <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Associate the internal components with the inverter by accessing the menu\"Settings &gt; Service &gt; Accept boards\" (refer toprocedure in this manual).- In case the warning continues to be present evenfollowing the association contact Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-5d727e7 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Associate the internal components with the inverter by accessing the menu<br \/>\"Settings &gt; Service &gt; Accept boards\" (refer to<br \/>procedure in this manual).<br \/>- In case the warning continues to be present even<br \/>following the association contact Service STI Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"No code\"\n\t\tclass=\"elementor-repeater-item-c2d1167 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>No code<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"SET COUNTRY orNO NATION\"\n\t\tclass=\"elementor-repeater-item-eb1664a ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>SET COUNTRY or<br \/>NO NATION<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"No Led\"\n\t\tclass=\"elementor-repeater-item-e3dca29 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>No Led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"SET COUNTRY or NO NATION:Indicates thatthe grid standard on the inverter was not set during installation.\"\n\t\tclass=\"elementor-repeater-item-6c31860 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>SET COUNTRY or NO NATION:<\/strong><br \/>Indicates that<br \/>the grid standard on the inverter was not set during installation.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Set the grid standard of the country of installation by followingthe instructions in the present of the inverter.- In case the warning continues to be present even atfollowing the setting of the grid standard, contact the Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-e668f83 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Set the grid standard of the country of installation by following<br \/>the instructions in the present of the inverter.<br \/>- In case the warning continues to be present even at<br \/>following the setting of the grid standard, contact the Service STI Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"No code\"\n\t\tclass=\"elementor-repeater-item-3259d1b ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>No code<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Vac absent\"\n\t\tclass=\"elementor-repeater-item-4b7c2ae ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Vac absent<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-0d644f6 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Vac absent:The inverter displays the message \"Vac absent\"when it does not detect output voltage (AC side).\"\n\t\tclass=\"elementor-repeater-item-12425d4 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Vac absent:<\/strong><br \/>The inverter displays the message \"Vac absent\"<br \/>when it does not detect output voltage (AC side).<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Check the mains voltage at the AC terminal block of the inverter.- If it is absent, check for tripping of protectionson the line and the presence of mains voltage at the point ofsupply.\"\n\t\tclass=\"elementor-repeater-item-6122a37 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Check the mains voltage at the AC terminal block of the inverter.<br \/>- If it is absent, check for tripping of protections<br \/>on the line and the presence of mains voltage at the point of<br \/>supply.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"No code\"\n\t\tclass=\"elementor-repeater-item-bcd7ecb ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>No code<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Mem. spoil\"\n\t\tclass=\"elementor-repeater-item-2b69349 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Mem. spoil<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-9bb694a ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Memory Failed:The inverter displays the message \"Memoryfailed\" when it detects communication problem with thememory card in which the inverter saves, daily,the value of daily energy produced.\"\n\t\tclass=\"elementor-repeater-item-cb2236b ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Memory Failed:<\/strong><br \/>The inverter displays the message \"Memory<br \/>failed\" when it detects communication problem with the<br \/>memory card in which the inverter saves, daily,<br \/>the value of daily energy produced.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Remove the memory card and check that all connector terminals are soldered correctly. Then re-insertthe memory card and verify that it is properlyinserted into the dedicated counterpart- If the report continues to be present even infollowing the above checks, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-2b8cf6f ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Remove the memory card and check that all connector terminals are soldered correctly<br \/>. Then re-insert<br \/>the memory card and verify that it is properly<br \/>inserted into the dedicated counterpart<br \/>- If the report continues to be present even in<br \/>following the above checks, contact STI Service Repair. <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"No code\"\n\t\tclass=\"elementor-repeater-item-3c933f2 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>No code<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Waiting for sunshine\"\n\t\tclass=\"elementor-repeater-item-82109cb ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Waiting for sunshine<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Green led flash.\"\n\t\tclass=\"elementor-repeater-item-8cb2898 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Green led flash.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Waiting for sun:The inverter displays the message \"waiting for sun\"when, as a result of a warning from W001 and\/orW002, the voltage from the photovoltaic generatorturns out to be lower than the trigger voltage(Vstart).\"\n\t\tclass=\"elementor-repeater-item-7cbf876 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Waiting for sun:<\/strong><br \/>The inverter displays the message \"waiting for sun\"<br \/>when, as a result of a warning from W001 and\/or<br \/>W002, the voltage from the photovoltaic generator<br \/>turns out to be lower than the trigger voltage<br \/>(Vstart).<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Check the input voltage to the inverter.- If it does not exceed Vstart, check for sufficient irradiationand correct system composition.- If it exceeds Vstart, contact Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-4e9f9b7 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Check the input voltage to the inverter.<br \/>- If it does not exceed Vstart, check for sufficient irradiation<br \/>and correct system composition.<br \/>- If it exceeds Vstart, contact Service STI Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"W001\"\n\t\tclass=\"elementor-repeater-item-49bb8d4 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>W001<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Sun Low\"\n\t\tclass=\"elementor-repeater-item-b422158 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Sun Low<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-3260159 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Insufficient irradiation (Low input voltagewhen the inverter is turned on):Misconfiguration of the PV generator or a\"borderline\" configuration regarding the minimuminput voltage of the inverter.\"\n\t\tclass=\"elementor-repeater-item-9b55230 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Insufficient irradiation (Low input voltage<\/strong><br \/><strong>when the inverter is turned on):<\/strong><br \/>Misconfiguration of the PV generator or a<br \/>\"borderline\" configuration regarding the minimum<br \/>input voltage of the inverter.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Check the input voltage to the inverter.- If it does not exceed Vstart, check for sufficient irradiationand correct system composition.- If it exceeds Vstart, contact Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-ea80c55 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Check the input voltage to the inverter.<br \/>- If it does not exceed Vstart, check for sufficient irradiation<br \/>and correct system composition.<br \/>- If it exceeds Vstart, contact Service STI Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"W002\"\n\t\tclass=\"elementor-repeater-item-f49b209 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>W002<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"UV Input\"\n\t\tclass=\"elementor-repeater-item-e35c3a6 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>UV Input<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-33665d9 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Insufficient irradiation (Low input voltagebeing shut down):Misconfiguration of the PV generator ora \"borderline\" configuration regarding the minimuminput voltage of the inverter\"\n\t\tclass=\"elementor-repeater-item-5362f2a ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Insufficient irradiation (Low input voltage<\/strong><br \/><strong>being shut down):<\/strong><br \/>Misconfiguration of the PV generator or<br \/>a \"borderline\" configuration regarding the minimum<br \/>input voltage of the inverter<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Check the input voltage to the inverter:- If it does not exceed Vstart check for sufficientirradiation and correct system composition.- If it exceeds Vstart contact Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-091f619 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Check the input voltage to the inverter:<br \/>- If it does not exceed Vstart check for sufficient<br \/>irradiation and correct system composition.<br \/>- If it exceeds Vstart contact Service STI Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"W003\"\n\t\tclass=\"elementor-repeater-item-fbdca8e ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>W003<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Grid Fail\"\n\t\tclass=\"elementor-repeater-item-3b7ee4a ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Grid Fail<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-1eb2239 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Grid voltage parameters out of range:This error is signaled when duringnormal operation of the inverter, the grid parametersgo out of the limits set by the operator:- Grid voltage absent (after signaling, the invertergoes to \"Vac Absent\")- Grid voltage unstable (down and up)- Grid frequency unstable\"\n\t\tclass=\"elementor-repeater-item-7fe68f2 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Grid voltage parameters out of range:<\/strong><br \/>This error is signaled when during<br \/>normal operation of the inverter, the grid parameters<br \/>go out of the limits set by the operator:<br \/>- Grid voltage absent (after signaling, the inverter<br \/>goes to \"Vac Absent\")<br \/>- Grid voltage unstable (down and up)<br \/>- Grid frequency unstable<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Check the grid voltage on the inverter.- If absent, check the absence of grid voltage on thepoint of supply.- If, on the other hand, the voltage tends to rise (when the inverteris connected), high line or grid impedances are present.- Check the grid voltage also on the supply:- If it is high, it means that high impedance is present on thegrid. If this is the case, request an adjustment of the line voltagefrom the operator. If the operator authorizes a change to the parametersof the inverter agree the new limits with the Service STI Repair.- If the voltage at the point of supply is much lower thanthe voltage measured on the inverter it is necessary to adjust the line(inverter-to-meter).- If the grid voltage and frequency are found to be within the limits(even when the inverter is connected to the grid) contact the Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-0cf2d68 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Check the grid voltage on the inverter.<br \/>- If absent, check the absence of grid voltage on the<br \/>point of supply.<br \/>- If, on the other hand, the voltage tends to rise (when the inverter<br \/>is connected), high line or grid impedances are present.<br \/>- Check the grid voltage also on the supply:<br \/>- If it is high, it means that high impedance is present on the<br \/>grid. If this is the case, request an adjustment of the line voltage<br \/>from the operator. If the operator authorizes a change to the parameters<br \/>of the inverter agree the new limits with the Service STI Repair.<br \/>- If the voltage at the point of supply is much lower than<br \/>the voltage measured on the inverter it is necessary to adjust the line<br \/>(inverter-to-meter).<br \/>- If the grid voltage and frequency are found to be within the limits<br \/>(even when the inverter is connected to the grid) contact the Service STI Repair.  <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"W009\"\n\t\tclass=\"elementor-repeater-item-c3356bd ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>W009<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Empty Table\"\n\t\tclass=\"elementor-repeater-item-40bce73 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Empty Table<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-055ec39 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Wind generator characterization table notfilled in (WIND models only)\"\n\t\tclass=\"elementor-repeater-item-47d5b05 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Wind generator characterization table not<br \/>filled in <strong>(WIND models only)<\/strong><\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"(WIND models only)\"\n\t\tclass=\"elementor-repeater-item-4531074 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>(WIND models only)<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"W010 (not shown on display)\"\n\t\tclass=\"elementor-repeater-item-2d55540 ekit_table_data_\">\n\t\t\t\t<a >\n\t\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>W010 <strong>(not shown on display)<\/strong><\/p>\n\t\t\t<\/div>\n\n\t\t\t\t\t<\/a>\n\t\t\t<\/td>\n\t\t<td data-order=\"Faulty fan!\"\n\t\tclass=\"elementor-repeater-item-0439b9c ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Faulty fan!<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led flash.\"\n\t\tclass=\"elementor-repeater-item-255e883 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led flash.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Faulty fan:This error occurs when there is a malfunctionof the whole fan(s) at the inverter.\"\n\t\tclass=\"elementor-repeater-item-9f09b90 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Faulty fan:<\/strong><br \/>This error occurs when there is a malfunction<br \/>of the whole fan(s) at the inverter.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- Should the alarm persistently recur, contactthe Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-6f7f139 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- Should the alarm persistently recur, contact<br \/>the Service STI Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"W011\"\n\t\tclass=\"elementor-repeater-item-6151c5b ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>W011<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Bulk UV\"\n\t\tclass=\"elementor-repeater-item-68f0ffa ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Bulk UV<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-d06fe4f ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Low voltage of \"Bulk\" (DC-DC circuit):The alarm (which is a warning and not an error), is generatedwhen the voltage at the ends of the bulk capacitorsdoes not reach the threshold for inverter operation(internal threshold that cannot be changed).\"\n\t\tclass=\"elementor-repeater-item-bccf916 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Low voltage of \"Bulk\" (DC-DC circuit):<\/strong><br \/>The alarm (which is a warning and not an error), is generated<br \/>when the voltage at the ends of the bulk capacitors<br \/>does not reach the threshold for inverter operation<br \/>(internal threshold that cannot be changed).<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Raise the value of the trigger voltage (Vstart) soas to have sufficient power from the PV generator at the time of thegrid connection of the inverter.- Check the input voltage to the inverter.- If it does not exceed Vstart, check for sufficientirradiation and correct system composition.- If it exceeds Vstart, contact Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-02c0935 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Raise the value of the trigger voltage (Vstart) so<br \/>as to have sufficient power from the PV generator at the time of the<br \/>grid connection of the inverter.<br \/>- Check the input voltage to the inverter.<br \/>- If it does not exceed Vstart, check for sufficient<br \/>irradiation and correct system composition.<br \/>- If it exceeds Vstart, contact Service STI Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"W012 (not shown on display)\"\n\t\tclass=\"elementor-repeater-item-6b4c947 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>W012 <strong>(not shown on display)<\/strong><\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Batt. unloaded\"\n\t\tclass=\"elementor-repeater-item-c32ce74 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Batt. unloaded<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-0b829ea ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Low Battery:The inverter displays the message \"Low Battery\"when it detects that the buffer battery voltageis too low.\"\n\t\tclass=\"elementor-repeater-item-bc6bb45 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Low Battery:<\/strong><br \/>The inverter displays the message \"Low Battery\"<br \/>when it detects that the buffer battery voltage<br \/>is too low.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Verify that the date\/time are set correctly and ifthey are not, set them.Then proceed to completely turn off the inverter(both AC and DC side) and wait for a few minutes.Finally restart the inverter and check if the date\/time are stillset correctly or if they are reset to 01\/01\/2000.In this case, replace the battery when the inverter is completelyoff (sectioning AC and DC side) paying attention to the respectof polarity\"\n\t\tclass=\"elementor-repeater-item-727c759 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Verify that the date\/time are set correctly and if<br \/>they are not, set them.<br \/>Then proceed to completely turn off the inverter<br \/>(both AC and DC side) and wait for a few minutes.<br \/>Finally restart the inverter and check if the date\/time are still<br \/>set correctly or if they are reset to 01\/01\/2000.<br \/>In this case, replace the battery when the inverter is completely<br \/>off (sectioning AC and DC side) paying attention to the respect<br \/>of polarity<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"W013 (not shown on display)\"\n\t\tclass=\"elementor-repeater-item-3901d43 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>W013 <strong>(not shown on display)<\/strong><\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Faulty clock\"\n\t\tclass=\"elementor-repeater-item-f2cdaf3 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Faulty clock<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-b9251d3 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Clock Fault:The alarm occurs when a differencegreater than 1 minute is created in the time displayedfrom the internal time of the microprocessors and indicatesa clock circuit malfunction.\"\n\t\tclass=\"elementor-repeater-item-2456c63 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Clock Fault:<\/strong><br \/>The alarm occurs when a difference<br \/>greater than 1 minute is created in the time displayed<br \/>from the internal time of the microprocessors and indicates<br \/>a clock circuit malfunction.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- Should the alarm persistently recur, contactthe Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-7c093aa ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- Should the alarm persistently recur, contact<br \/>the Service STI Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"W017 (only for models with monitored string fuses)\"\n\t\tclass=\"elementor-repeater-item-22f1583 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>W017 <strong>(only for models with monitored string fuses)<\/strong><\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"String. Err.\"\n\t\tclass=\"elementor-repeater-item-d5e7fd3 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>String. Err.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led flash.\"\n\t\tclass=\"elementor-repeater-item-c8d665b ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led flash.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Error detected in string current measurement:Damaged string protection fuse(s)\"\n\t\tclass=\"elementor-repeater-item-118ea43 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Error detected in string current measurement:<\/strong><br \/>Damaged string protection fuse(s)<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Check with a multimeter the status of the fuses (located on thefuse boards).- If one or more fuses are open arrange to replace them and checkthat the input current on the string(s) does not exceed the fuse rating(in case string parallelsexternal to the inverter were made).- If there are no damaged string fuses and the invertercontinues to display the alarm message check whetherthe settings to be made via the Aurora Manager software arecorrect (presence or absence of one or more input strings).\"\n\t\tclass=\"elementor-repeater-item-63c81f7 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Check with a multimeter the status of the fuses (located on the<br \/>fuse boards).<br \/>- If one or more fuses are open arrange to replace them and check<br \/>that the input current on the string(s) does not exceed the fuse rating<br \/>(in case string parallels<br \/>external to the inverter were made).<br \/>- If there are no damaged string fuses and the inverter<br \/>continues to display the alarm message check whether<br \/>the settings to be made via the Aurora Manager software are<br \/>correct (presence or absence of one or more input strings).<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"W018 (only for models withSPD monitored)\"\n\t\tclass=\"elementor-repeater-item-8709f5f ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>W018 <strong>(only for models with<\/strong><br \/><strong>SPD monitored)<\/strong><\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"SPD DC Err\"\n\t\tclass=\"elementor-repeater-item-1956393 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>SPD DC Err<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led flash.\"\n\t\tclass=\"elementor-repeater-item-9322e93 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led flash.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Tripping of DC-side surge arresters:Surge arresters located on the DC side damaged\"\n\t\tclass=\"elementor-repeater-item-8dd8bb6 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Tripping of DC-side surge arresters:<\/strong><br \/>Surge arresters located on the DC side damaged<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Observe the inspection window on each arrester(DC side). If it is red in color, the arrester is damaged and youmust replace the cartridge.- If the alarm status continues even thoughall the arresters have the green inspection windowcontact Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-bb47e76 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Observe the inspection window on each arrester<br \/>(DC side). If it is red in color, the arrester is damaged and you<br \/>must replace the cartridge.<br \/>- If the alarm status continues even though<br \/>all the arresters have the green inspection window<br \/>contact Service STI Repair. <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"W019 (only for models withSPD monitored)\"\n\t\tclass=\"elementor-repeater-item-eba5e93 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>W019 <strong>(only for models with<\/strong><br \/><strong>SPD monitored)<\/strong><\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"SPD AC Err\"\n\t\tclass=\"elementor-repeater-item-1616d94 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>SPD AC Err<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led flash.\"\n\t\tclass=\"elementor-repeater-item-a85e9b5 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led flash.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Tripping of AC-side surge arresters:Surge arresters located on the AC side damaged\"\n\t\tclass=\"elementor-repeater-item-e648c21 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Tripping of AC-side surge arresters:<\/strong><br \/>Surge arresters located on the AC side damaged<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Observe the inspection window on each arrester(AC side). If it is red in color, the arrester is damaged and youmust replace the cartridge.- If the alarm status continues to be present even thoughall the arresters have the green inspection windowcontact Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-c03bc21 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Observe the inspection window on each arrester<br \/>(AC side). If it is red in color, the arrester is damaged and you<br \/>must replace the cartridge.<br \/>- If the alarm status continues to be present even though<br \/>all the arresters have the green inspection window<br \/>contact Service STI Repair. <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"W022 (not shown on display)\"\n\t\tclass=\"elementor-repeater-item-888aaf5 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>W022 <strong>(not shown on display)<\/strong><\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Reactive power mode changed\"\n\t\tclass=\"elementor-repeater-item-ae4d83d ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Reactive power mode changed<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"No Led\"\n\t\tclass=\"elementor-repeater-item-2d53636 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>No Led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Changing the power management modereactive power:Changing the reactive power management mode;this can be done via displayor advanced configuration software.\"\n\t\tclass=\"elementor-repeater-item-1e6d753 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Changing the power management mode<\/strong><br \/><strong>reactive<\/strong> power:<br \/>Changing the reactive power management mode;<br \/>this can be done via display<br \/>or advanced configuration software.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Changing the reactive power management modeis done directly by the customer\/installer and is notan error. The information is only saved to theevent history stored by the inverter\"\n\t\tclass=\"elementor-repeater-item-d5095f2 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Changing the reactive power management mode<br \/>is done directly by the customer\/installer and is not<br \/>an error. The information is only saved to the<br \/>event history stored by the inverter <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"W023 (not shown on display)\"\n\t\tclass=\"elementor-repeater-item-c8d431b ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>W023 <strong>(not shown on display)<\/strong><\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"date\/time changed\"\n\t\tclass=\"elementor-repeater-item-a11eea8 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>date\/time changed<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"No Led\"\n\t\tclass=\"elementor-repeater-item-c2d2b30 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>No Led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Changing the date and time of the inverter:Change the date and time of the inverter; this changecan be made via display or advancedconfiguration software.\"\n\t\tclass=\"elementor-repeater-item-f0c6ac1 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Changing<\/strong> the date and time of the inverter<strong>:<\/strong><br \/>Change the date and time of the inverter; this change<br \/>can be made via display or advanced<br \/>configuration software.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- The change of the inverter's internal date and time is madedirectly by the customer\/installer and is not anerror. The information is only saved to theevent history stored by the inverter\"\n\t\tclass=\"elementor-repeater-item-3eb5fd3 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- The change of the inverter's internal date and time is made<br \/>directly by the customer\/installer and is not an<br \/>error. The information is only saved to the<br \/>event history stored by the inverter <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"W024 (not shown on display)\"\n\t\tclass=\"elementor-repeater-item-5564854 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>W024 <strong>(not shown on display)<\/strong><\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Energy data reset\"\n\t\tclass=\"elementor-repeater-item-170b1ca ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Energy data reset<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"No Led\"\n\t\tclass=\"elementor-repeater-item-a952172 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>No Led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Reset of energy statistics data storedin the EEPROM:Reset of energy data stored internally in the inverter;this can be done via display oradvanced configuration software.\"\n\t\tclass=\"elementor-repeater-item-cccda75 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Reset of <strong>energy statistics data stored<\/strong><br \/><strong>in the EEPROM:<\/strong><br \/>Reset of energy data stored internally in the inverter;<br \/>this can be done via display or<br \/>advanced configuration software.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- The resetting of the partial energy values stored by the inverteris done directly by the customer\/installer and is notan error. The information is only saved on thehistory of events stored by the inverter.- The alert may also occur in case of replacementof the Memory Card where statistical production data are saved\"\n\t\tclass=\"elementor-repeater-item-947b1c5 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- The resetting of the partial energy values stored by the inverter<br \/>is done directly by the customer\/installer and is not<br \/>an error. The information is only saved on the<br \/>history of events stored by the inverter.<br \/>- The alert may also occur in case of replacement<br \/>of the Memory Card where statistical production data are saved <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E001\"\n\t\tclass=\"elementor-repeater-item-0562acd ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E001<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Input OC\"\n\t\tclass=\"elementor-repeater-item-d29edc7 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Input OC<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-1879453 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Input overcurrent (PV generator):The alarm occurs when the input currentof the inverter exceeds the maximum input current thresholdof the inverter.\"\n\t\tclass=\"elementor-repeater-item-092f336 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Input overcurrent (PV generator):<\/strong><br \/>The alarm occurs when the input current<br \/>of the inverter exceeds the maximum input current threshold<br \/>of the inverter.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Check whether the composition of the PV generator allowshaving an input current that exceeds the maximum thresholdallowed by the inverter, and that the configuration of the inputs (independentor in parallel) is done correctly.- If both checks are successful, contact Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-161b458 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Check whether the composition of the PV generator allows<br \/>having an input current that exceeds the maximum threshold<br \/>allowed by the inverter, and that the configuration of the inputs (independent<br \/>or in parallel) is done correctly.<br \/>- If both checks are successful, contact Service STI Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E002\"\n\t\tclass=\"elementor-repeater-item-960f902 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E002<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Input OV\"\n\t\tclass=\"elementor-repeater-item-65f394f ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Input OV<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-9ac96c8 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Input overvoltage (PV generator):The alarm is generated when the input voltage(coming from the PV generator) exceeds the threshold of maximuminput voltage of the inverter.The alarm intervenes before the thresholdabsolute threshold is reached beyond which the inverter will be damaged.When the input voltage of the inverter exceeds the thresholdof Over Voltage, the inverter, will not start due togeneration of the alarm.\"\n\t\tclass=\"elementor-repeater-item-2476666 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Input overvoltage (PV generator):<\/strong><br \/>The alarm is generated when the input voltage<br \/>(coming from the PV generator) exceeds the threshold of maximum<br \/>input voltage of the inverter.<br \/>The alarm intervenes before the threshold<br \/>absolute threshold is reached beyond which the inverter will be damaged.<br \/>When the input voltage of the inverter exceeds the threshold<br \/>of Over Voltage, the inverter, will not start due to<br \/>generation of the alarm.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- It is necessary to measure the input voltageinside the inverter with a voltmeter.- If it turns out to be higher than the maximum voltage of the operationalrange, the alarm is real and it is necessary to check theconfiguration of the PV generator. If the voltage has exceededeven the maximum input threshold, the inverter may bedamaged.- If it turns out to be less than the maximum voltage of the operationalrange, this is an alarm induced by an internalmalfunction and you need to contact Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-ee5b30c ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- It is necessary to measure the input voltage<br \/>inside the inverter with a voltmeter.<br \/>- If it turns out to be higher than the maximum voltage of the operational<br \/>range, the alarm is real and it is necessary to check the<br \/>configuration of the PV generator. If the voltage has exceeded<br \/>even the maximum input threshold, the inverter may be<br \/>damaged.<br \/>- If it turns out to be less than the maximum voltage of the operational<br \/>range, this is an alarm induced by an internal<br \/>malfunction and you need to contact Service STI Repair. <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E003\"\n\t\tclass=\"elementor-repeater-item-bcf6f68 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E003<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"No Parameters\"\n\t\tclass=\"elementor-repeater-item-b200b96 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>No Parameters<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-0eb358b ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"DSP initialization error:The main microcontroller is unable to initializethe two DSPs (booster stage and inverter stage) correctly.The error is caused by communication problemson the internal inverter bus.\"\n\t\tclass=\"elementor-repeater-item-f2758ed ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>DSP initialization error:<\/strong><br \/>The main microcontroller is unable to initialize<br \/>the two DSPs (booster stage and inverter stage) correctly.<br \/>The error is caused by communication problems<br \/>on the internal inverter bus.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- If the problem (after a power down and restartof the inverter) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-ee677b5 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- If the problem (after a power down and restart<br \/>of the inverter) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E004\"\n\t\tclass=\"elementor-repeater-item-226ad75 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E004<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Bulk OV\"\n\t\tclass=\"elementor-repeater-item-da67d95 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Bulk OV<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-2ecd134 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Overvoltage of \"Bulk\" (DC-DC circuit):Internal inverter error. The alarm is raised whenthe voltage at the ends of the bulk capacitors exceeds theOver Voltage threshold (internal threshold that cannot be changed).\"\n\t\tclass=\"elementor-repeater-item-76b8d40 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Overvoltage of \"Bulk\" (DC-DC circuit):<\/strong><br \/>Internal inverter error. The alarm is raised when<br \/>the voltage at the ends of the bulk capacitors exceeds the<br \/>Over Voltage threshold (internal threshold that cannot be changed). <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- The alarm may be caused by causes external to the inverter:- Excessive input voltage may be detected asbulk overvoltage condition. In this case it is advisableto check the input voltage of the inverter and ifthis value is close to the input OV thresholdrevise the PV generator configuration.- Excessive grid voltage could cause thebulk voltage to rise in an uncontrolled manner resulting intripping of the protection and thus generation of the alarm. In such casesthe alarm is transient and the inverter will automatically restart- The alarm may be caused by causes internal to the inverter and inthis case the Service STI Repair should be contacted.\"\n\t\tclass=\"elementor-repeater-item-6d69998 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- The alarm may be caused by causes external to the inverter:<br \/>- Excessive input voltage may be detected as<br \/>bulk overvoltage condition. In this case it is advisable<br \/>to check the input voltage of the inverter and if<br \/>this value is close to the input OV threshold<br \/>revise the PV generator configuration.<br \/>- Excessive grid voltage could cause the<br \/>bulk voltage to rise in an uncontrolled manner resulting in<br \/>tripping of the protection and thus generation of the alarm. In such cases<br \/>the alarm is transient and the inverter will automatically restart<br \/>- The alarm may be caused by causes internal to the inverter and in<br \/>this case the Service STI Repair should be contacted.  <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E005\"\n\t\tclass=\"elementor-repeater-item-389b472 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E005<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Comm.Error\"\n\t\tclass=\"elementor-repeater-item-6d5dcd3 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Comm.Error<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-2cfe2d0 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Internal inverter communication error:The alarm occurs when there are problems withcommunication between the inverter's internal control devices.\"\n\t\tclass=\"elementor-repeater-item-c30b094 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Internal inverter communication error:<\/strong><br \/>The alarm occurs when there are problems with<br \/>communication between the inverter's internal control devices.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- If the problem (after a power down and restartof the inverter) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-9443c5b ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- If the problem (after a power down and restart<br \/>of the inverter) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E006\"\n\t\tclass=\"elementor-repeater-item-f3d1b27 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E006<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"OC Output\"\n\t\tclass=\"elementor-repeater-item-e9cd26b ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>OC Output<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-3a947d4 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Output overcurrent:The alarm occurs when the output currentof the inverter exceeds the maximum current threshold ofinverter output.\"\n\t\tclass=\"elementor-repeater-item-5d65cfd ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Output overcurrent:<\/strong><br \/>The alarm occurs when the output current<br \/>of the inverter exceeds the maximum current threshold of<br \/>inverter output.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- If the problem (after a power down and restartof the inverter) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-dea7ebb ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- If the problem (after a power down and restart<br \/>of the inverter) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E007\"\n\t\tclass=\"elementor-repeater-item-5100691 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E007<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"IGBT Sat\"\n\t\tclass=\"elementor-repeater-item-82031b3 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>IGBT Sat<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-48a99e4 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Saturation detected on IGBT components:The alarm occurs when one of the active devicesof the inverter is in the saturation state.\"\n\t\tclass=\"elementor-repeater-item-b5e216b ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Saturation detected on IGBT components:<\/strong><br \/>The alarm occurs when one of the active devices<br \/>of the inverter is in the saturation state.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Once the error occurs, the inverter attempts to resumenormal operation.- In the event that the error occurs sporadically, it may beinduced by an abrupt transition of the grid voltage orof the input voltage but is not attributable to a malfunctionof the inverter.- If the error is related to an internal failure, it will continue to occurso it is necessary to contact Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-1fb0a93 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Once the error occurs, the inverter attempts to resume<br \/>normal operation.<br \/>- In the event that the error occurs sporadically, it may be<br \/>induced by an abrupt transition of the grid voltage or<br \/>of the input voltage but is not attributable to a malfunction<br \/>of the inverter.<br \/>- If the error is related to an internal failure, it will continue to occur<br \/>so it is necessary to contact Service STI Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E009\"\n\t\tclass=\"elementor-repeater-item-20255c8 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E009<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Internal error\"\n\t\tclass=\"elementor-repeater-item-d5847d9 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Internal error<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-2d4842d ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Internal inverter error:Internal inverter error\"\n\t\tclass=\"elementor-repeater-item-df3b882 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Internal inverter error:<\/strong><br \/>Internal inverter error<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- If the problem (after a power down and restartof the inverter) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-42c9bc6 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- If the problem (after a power down and restart<br \/>of the inverter) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E010\"\n\t\tclass=\"elementor-repeater-item-c7875d0 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E010<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Bulk Low\"\n\t\tclass=\"elementor-repeater-item-133cce5 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Bulk Low<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-8a3fc56 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Low \"Bulk\" voltage (DC-DC circuit):The alarm may be caused by causes external to the inverter:a reduced inverter input voltage (slightlyhigher than the trigger voltage) but which is notaccompanied by sufficient power availability frompart of the PV generator (typical condition ofphases with low irradiation)\"\n\t\tclass=\"elementor-repeater-item-27cc015 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Low \"Bulk\" voltage (DC-DC circuit):<\/strong><br \/>The alarm may be caused by causes external to the inverter:<br \/>a reduced inverter input voltage (slightly<br \/>higher than the trigger voltage) but which is not<br \/>accompanied by sufficient power availability from<br \/>part of the PV generator (typical condition of<br \/>phases with low irradiation)<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- If the error report occurs sporadically itcan be attributed to causes external to the inverter (low irradianceand thus diapability of little power from the generatorPV).- If the problem occurs systematically even underconditions of high irradiance and with input voltagesignificantly higher than the trigger voltage, contactthe Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-2932f91 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- If the error report occurs sporadically it<br \/>can be attributed to causes external to the inverter (low irradiance<br \/>and thus diapability of little power from the generator<br \/>PV).<br \/>- If the problem occurs systematically even under<br \/>conditions of high irradiance and with input voltage<br \/>significantly higher than the trigger voltage, contact<br \/>the Service STI Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E011\"\n\t\tclass=\"elementor-repeater-item-e72c441 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E011<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Ramp Fail\"\n\t\tclass=\"elementor-repeater-item-1dd8777 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Ramp Fail<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-e96fb9a ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"High \"Booster\" ramp-up time:Internal error in the inverter related to the ramp-up time oframp-up work of the DC-DC circuit part (Booster)\"\n\t\tclass=\"elementor-repeater-item-b6f4be7 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>High \"Booster\" ramp-up time:<\/strong><br \/>Internal error in the inverter related to the ramp-up time of<br \/>ramp-up work of the DC-DC circuit part (Booster)<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- If the problem (after a power down and restartof the inverter) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-5b513ac ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- If the problem (after a power down and restart<br \/>of the inverter) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E012\"\n\t\tclass=\"elementor-repeater-item-580f15e ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E012<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"DcDc Fail\"\n\t\tclass=\"elementor-repeater-item-ac5e46d ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>DcDc Fail<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-287ee2c ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Error on the \"Booster\" circuit part (DC-DC side)revealed by the \"Inverter\" circuit part (DC-AC side):Inverter internal error related to the operation of theDC-DC(Booster) circuit part\"\n\t\tclass=\"elementor-repeater-item-a5f137d ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Error on the \"Booster\" circuit part (DC-DC side)<\/strong><br \/><strong>revealed by the \"Inverter\" circuit part (DC-AC side):<\/strong><br \/>Inverter internal error related to the operation of the<br \/>DC-DC(Booster) circuit part<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- If the problem (once the inverter has been turned off and back on) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-d8a2dec ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- If the problem (once the inverter has been turned off and back on<br \/>) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E013\"\n\t\tclass=\"elementor-repeater-item-a3f0a69 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E013<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Wrong Mode\"\n\t\tclass=\"elementor-repeater-item-f1c9836 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Wrong Mode<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-58d0bc0 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Incorrect input configuration (set in parallelinstead of independent):The alarm is raised only when the inverteris configured with parallel inputs. In this particularconfiguration, the inverter checks theinput voltage of each of the two channels, and if thetwo voltages differ from each other by more than 20Vdc the alarm israised.\"\n\t\tclass=\"elementor-repeater-item-068e1f9 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Incorrect input configuration (set in parallel<\/strong><br \/><strong>instead of independent):<\/strong><br \/>The alarm is raised only when the inverter<br \/>is configured with parallel inputs. In this particular<br \/>configuration, the inverter checks the<br \/>input voltage of each of the two channels, and if the<br \/>two voltages differ from each other by more than 20Vdc the alarm is<br \/>raised. <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Check that the \"IN MODE\" switch setting is intentionallyset to \"PAR\" and that the jumpershave been inserted between the two input channels.- If the inverter configuration is correct, check that theinput strings have the usual number of panels in series,of the usual brand, and with the same tilt\/orientation.- If both the inverter configuration and the characteristics of thePV generator are in accordance with the specifications, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-d24558f ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Check that the \"IN MODE\" switch setting is intentionally<br \/>set to \"PAR\" and that the jumpers<br \/>have been inserted between the two input channels.<br \/>- If the inverter configuration is correct, check that the<br \/>input strings have the usual number of panels in series,<br \/>of the usual brand, and with the same tilt\/orientation.<br \/>- If both the inverter configuration and the characteristics of the<br \/>PV generator are in accordance with the specifications, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E014\"\n\t\tclass=\"elementor-repeater-item-f55fe9e ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E014<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Over Temp.\"\n\t\tclass=\"elementor-repeater-item-214d692 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Over Temp.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-c93155b ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Inverter internal overtemperature:external temperatures above 60\u00b0C. This parameteralso depends on the power to be delivered by the invertersince the measurement of temperatures is doneinternally and is affected by the heat dissipated by thecomponents of the inverter itself\"\n\t\tclass=\"elementor-repeater-item-63ff303 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Inverter internal overtemperature:<\/strong><br \/>external temperatures above 60\u00b0C. This parameter<br \/>also depends on the power to be delivered by the inverter<br \/>since the measurement of temperatures is done<br \/>internally and is affected by the heat dissipated by the<br \/>components of the inverter itself <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Make sure that the inverter is not exposed to direct sunlight.Wait until the temperatures to which the inverter is exposed returnto the operating range and the inverter is able to cool down.- If the problem (once the ambient temperature hasreturned to the range) persists, contact Service STI Repair. Remember to wait a necessary amount of time to allowthe inverter to cool down\"\n\t\tclass=\"elementor-repeater-item-131267e ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Make sure that the inverter is not exposed to direct sunlight.<br \/>Wait until the temperatures to which the inverter is exposed return<br \/>to the operating range and the inverter is able to cool down.<br \/>- If the problem (once the ambient temperature has<br \/>returned to the range) persists, contact Service STI Repair. Remember to wait a necessary amount of time to allow<br \/>the inverter to cool down <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E015\"\n\t\tclass=\"elementor-repeater-item-acfb1c3 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E015<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Bulk Cap Fail\"\n\t\tclass=\"elementor-repeater-item-c8a1c08 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Bulk Cap Fail<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-4e124a2 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Fault detected on \"Bulk\" capacitors:Internal inverter error related to problem in bulk capacitors.\"\n\t\tclass=\"elementor-repeater-item-641e974 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Fault detected on \"Bulk\" capacitors:<\/strong><br \/>Internal inverter error related to problem in bulk capacitors<br \/>.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- If the problem (after a power down and restartof the inverter) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-38e01e7 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- If the problem (after a power down and restart<br \/>of the inverter) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E016\"\n\t\tclass=\"elementor-repeater-item-f5a6dc3 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E016<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Inverter Fail\"\n\t\tclass=\"elementor-repeater-item-d60b9a2 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Inverter Fail<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-f0b68d8 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Error on the \"Inverter\" circuit part (DC-ACside)revealed by the \"Booster\" circuit part (DC-DC side):The alarm is generated when a problem is detectedin the inverter(DC\/AC) circuit part\"\n\t\tclass=\"elementor-repeater-item-a907690 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Error on the \"Inverter\" circuit part (DC-AC<\/strong><strong>side)<\/strong><br \/><strong>revealed by the \"Booster\" circuit part (DC-DC side):<\/strong><br \/>The alarm is generated when a problem is detected<br \/>in the inverter(DC\/AC) circuit part<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- If the problem (after a power down and restartof the inverter) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-3179ff6 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- If the problem (after a power down and restart<br \/>of the inverter) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E017\"\n\t\tclass=\"elementor-repeater-item-e1df879 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E017<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Start Timeout\"\n\t\tclass=\"elementor-repeater-item-f92410c ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Start Timeout<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-0a6cad3 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"High \"Inverter\" time to steady state entry:Internal error in the inverter related to thesteady state work entry time of the DC-AC circuit part (Inverter).The alarm may be caused by causes external to the inverter:a low inverter input voltage (slightlyhigher than the trigger voltage) but which is notaccompanied by sufficient power availability frompart of the PV generator (typical condition ofphases with low irradiation)\"\n\t\tclass=\"elementor-repeater-item-4d2f411 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>High \"Inverter\" time<\/strong> to steady state entry<strong>:<\/strong><br \/>Internal error in the inverter related to the<br \/>steady state work entry time of the DC-AC circuit part (Inverter).<br \/>The alarm may be caused by causes external to the inverter:<br \/>a low inverter input voltage (slightly<br \/>higher than the trigger voltage) but which is not<br \/>accompanied by sufficient power availability from<br \/>part of the PV generator (typical condition of<br \/>phases with low irradiation)<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- If the error report occurs sporadically itcan be attributed to causes external to the inverter (low irradianceand thus diapability of little power from the generatorPV).- If the problem occurs systematically even underconditions of high irradiance and with input voltagesignificantly higher than the trigger voltage, contact Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-0684d71 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- If the error report occurs sporadically it<br \/>can be attributed to causes external to the inverter (low irradiance<br \/>and thus diapability of little power from the generator<br \/>PV).<br \/>- If the problem occurs systematically even under<br \/>conditions of high irradiance and with input voltage<br \/>significantly higher than the trigger voltage, contact Service STI Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E018\"\n\t\tclass=\"elementor-repeater-item-30bcfe6 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E018<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Ground Fault\"\n\t\tclass=\"elementor-repeater-item-7dbaacd ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Ground Fault<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Red led\"\n\t\tclass=\"elementor-repeater-item-450de88 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Red led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"High leakage current measured on the DC side(PV generator):The alarm is generated when, during normaloperation of the inverter, aleakage current to ground is detected in the DC section of the system.It is also possible for the inverter to generate thealarm message E018 also for AC leakage currents relatedto the capacitive nature of the PV generatorwith respect to ground.\"\n\t\tclass=\"elementor-repeater-item-47e073a ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>High leakage current measured on the DC side<\/strong><br \/><strong>(PV generator):<\/strong><br \/>The alarm is generated when, during normal<br \/>operation of the inverter, a<br \/>leakage current to ground is detected in the DC section of the system.<br \/>It is also possible for the inverter to generate the<br \/>alarm message E018 also for AC leakage currents related<br \/>to the capacitive nature of the PV generator<br \/>with respect to ground.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Make an insulation resistance measurement usinga megohmeter placed between the PV array (terminalpositive shorted to the negative pole) versus ground. Themeasurement is strongly influenced by environmental conditions soshould be made under the same conditions under which the error hasoccurred.- Should the measured value be less than 1megaohma check by a technician\/installer should be made on thePV generator to locate and eliminate the problem.- Should the measured value be greater than 1megaohmand the error report continues to be present, contactthe Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-af1100a ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Make an insulation resistance measurement using<br \/>a megohmeter placed between the PV array (terminal<br \/>positive shorted to the negative pole) versus ground. The<br \/>measurement is strongly influenced by environmental conditions so<br \/>should be made under the same conditions under which the error has<br \/>occurred.<br \/>- Should the measured value be less than 1megaohm<br \/>a check by a technician\/installer should be made on the<br \/>PV generator to locate and eliminate the problem.<br \/>- Should the measured value be greater than 1megaohm<br \/>and the error report continues to be present, contact<br \/>the Service STI Repair. <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E019\"\n\t\tclass=\"elementor-repeater-item-89622e8 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E019<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Ileak sens.fail\"\n\t\tclass=\"elementor-repeater-item-8833355 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Ileak sens.fail<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-697d71a ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Failure of the test on the current measurement sensorleakage current (DC side) :Before connecting to the grid, the inverter performs a self-testconcerning the leakage current sensor (Leakage).The test is carried out by \"forcing\" into theleakage current sensor a current of known value: the microprocessorcompares the read value with the known value.The error is generated if the comparison between the read valueand the known value during the test is not within the allowabletolerance.\"\n\t\tclass=\"elementor-repeater-item-550a7f5 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Failure of the test on the current measurement sensor<\/strong><br \/><strong>leakage current (DC side) :<\/strong><br \/>Before connecting to the grid, the inverter performs a self-test<br \/>concerning the leakage current sensor (Leakage).<br \/>The test is carried out by \"forcing\" into the<br \/>leakage current sensor a current of known value: the microprocessor<br \/>compares the read value with the known value.<br \/>The error is generated if the comparison between the read value<br \/>and the known value during the test is not within the allowable<br \/>tolerance.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.Due to its nature, the alarm manifests only beforeconnection to the grid- If the problem (once an inverter shutdown and restarthas been performed) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-47f39fe ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>Due to its nature, the alarm manifests only before<br \/>connection to the grid<br \/>- If the problem (once an inverter shutdown and restart<br \/>has been performed) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E020\"\n\t\tclass=\"elementor-repeater-item-1380720 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E020<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Self Test Error 1\"\n\t\tclass=\"elementor-repeater-item-c96167d ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Self Test Error 1<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-3091941 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Failure of test on the \"Booster\" relay (DCDC circuit):Before connecting to the grid, the inverter performs internaltests. One of these tests concerns the correct operationof the booster relay. The test is carried out by \"forcing\"the relay to switch and checking its functionality.The error is generated if a problem is foundin the relay actuation.\"\n\t\tclass=\"elementor-repeater-item-6144dab ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Failure of test on the \"Booster\" relay (DCDC circuit):<\/strong><br \/>Before connecting to the grid, the inverter performs internal<br \/>tests. One of these tests concerns the correct operation<br \/>of the booster relay. The test is carried out by \"forcing\"<br \/>the relay to switch and checking its functionality.<br \/>The error is generated if a problem is found<br \/>in the relay actuation.  <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.Due to its nature, the alarm manifests only prior toconnection to the grid- If the problem (once an inverter shutdown and restarthas been performed) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-4aeae54 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>Due to its nature, the alarm manifests only prior to<br \/>connection to the grid<br \/>- If the problem (once an inverter shutdown and restart<br \/>has been performed) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E021\"\n\t\tclass=\"elementor-repeater-item-8f1a8e2 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E021<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Self Test Error 2\"\n\t\tclass=\"elementor-repeater-item-7aea7f4 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Self Test Error 2<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-a5dd091 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Failure of \"Inverter\" relay test (DCAC circuit):Before connecting to the grid, the inverter performs internaltests. One of these tests concerns the correct operationof the inverter relay. The test is carried out by \"forcing\"the relay to switch and checking its functionality.The error is generated if a problem is foundin the relay's operation.\"\n\t\tclass=\"elementor-repeater-item-d4d9842 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Failure of \"Inverter\" relay test (DCAC circuit):<\/strong><br \/>Before connecting to the grid, the inverter performs internal<br \/>tests. One of these tests concerns the correct operation<br \/>of the inverter relay. The test is carried out by \"forcing\"<br \/>the relay to switch and checking its functionality.<br \/>The error is generated if a problem is found<br \/>in the relay's operation.  <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.Due to its nature, the alarm manifests only prior toconnection to the grid- If the problem (once an inverter shutdown and restarthas been performed) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-9701124 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>Due to its nature, the alarm manifests only prior to<br \/>connection to the grid<br \/>- If the problem (once an inverter shutdown and restart<br \/>has been performed) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E022\"\n\t\tclass=\"elementor-repeater-item-50ccc14 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E022<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Self Test Error 4\"\n\t\tclass=\"elementor-repeater-item-1378e52 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Self Test Error 4<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-4472161 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Timeout of tests performed on internal inverter relays:Timeout of self-test performed on relays ofcircuit part DC_AC (inverter) too high. May indicatea problem related to the above relays\"\n\t\tclass=\"elementor-repeater-item-ad5f9a3 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Timeout of tests performed on internal inverter relays:<\/strong><br \/>Timeout of self-test performed on relays of<br \/>circuit part DC_AC (inverter) too high. May indicate<br \/>a problem related to the above relays <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- If the problem (after a power down and restartof the inverter) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-feccb47 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- If the problem (after a power down and restart<br \/>of the inverter) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E023\"\n\t\tclass=\"elementor-repeater-item-e2fba49 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E023<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"DC inj error\"\n\t\tclass=\"elementor-repeater-item-62ff4c2 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>DC inj error<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-ac4623a ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"DC current input to the grid out of range:The error is generated if the DC component of thecurrent delivered to the grid exceeds the threshold of 0.5 percent of therated operating current.In any case, the inverter does not freeze due to the errorE023, but tries to connect to the grid again.Sporadic repetition of the error is an indication of stronggrid distortions or abrupt changes in irradiance,while a systematic repetition of theerror report, will be an indication of inverter failure\"\n\t\tclass=\"elementor-repeater-item-a0c08ef ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>DC current input to the grid out of range:<\/strong><br \/>The error is generated if the DC component of the<br \/>current delivered to the grid exceeds the threshold of 0.5 percent of the<br \/>rated operating current.<br \/>In any case, the inverter does not freeze due to the error<br \/>E023, but tries to connect to the grid again.<br \/>Sporadic repetition of the error is an indication of strong<br \/>grid distortions or abrupt changes in irradiance,<br \/>while a systematic repetition of the<br \/>error report, will be an indication of inverter failure<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Once the error occurs, the inverter attempts to resumenormal operation.- In the event that the error occurs sporadically, it may beinduced by an abrupt transition of the grid voltage orof the input voltage but is not attributable to a malfunctionof the inverter.- If the error is related to an internal failure, it will continue to occurso it is necessary to contact Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-2658096 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Once the error occurs, the inverter attempts to resume<br \/>normal operation.<br \/>- In the event that the error occurs sporadically, it may be<br \/>induced by an abrupt transition of the grid voltage or<br \/>of the input voltage but is not attributable to a malfunction<br \/>of the inverter.<br \/>- If the error is related to an internal failure, it will continue to occur<br \/>so it is necessary to contact Service STI Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E024\"\n\t\tclass=\"elementor-repeater-item-ef5c77f ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E024<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Internal error\"\n\t\tclass=\"elementor-repeater-item-0eb2157 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Internal error<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-11221f8 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Internal inverter error:Internal inverter error\"\n\t\tclass=\"elementor-repeater-item-3792d93 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Internal inverter error:<\/strong><br \/>Internal inverter error<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- If the problem (after a power down and restartof the inverter) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-5c3c776 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- If the problem (after a power down and restart<br \/>of the inverter) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E025 (not shown on display)\"\n\t\tclass=\"elementor-repeater-item-fbdad79 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E025 <strong>(not shown on display)<\/strong><\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Low Rice\"\n\t\tclass=\"elementor-repeater-item-f6a6c33 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Low Rice<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-05bd48b ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Low Insulation Resistance Value:Before connecting to the grid, the inverter takes the measurementof the insulation resistance of the PV generator with respect toground. If the insulation resistance measurementis less than 1Mohm, the inverter does not connect to the gridand shows the error \"Rice Low\" . The causes may be:- Damaged PV panel(s);- Panel junction box(es) not properlysealed, such that water infiltration and\/ormoisture can occur;- Problems in the connections between panels (not perfectlyinserted);- Poor quality cable splices;- Presence in the DC section of surge arrestersexternal to the inverter that are unsuitable (trigger voltagereduced compared to the characteristics of the generator stringsPV) or damaged;- Presence of moisture inside thefield cabinet, if any\"\n\t\tclass=\"elementor-repeater-item-b14c31d ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Low Insulation Resistance Value:<\/strong><br \/>Before connecting to the grid, the inverter takes the measurement<br \/>of the insulation resistance of the PV generator with respect to<br \/>ground. If the insulation resistance measurement<br \/>is less than 1Mohm, the inverter does not connect to the grid<br \/>and shows the error \"Rice Low\" . The causes may be:<br \/>- Damaged PV panel(s);<br \/>- Panel junction box(es) not properly<br \/>sealed, such that water infiltration and\/or<br \/>moisture can occur;<br \/>- Problems in the connections between panels (not perfectly<br \/>inserted);<br \/>- Poor quality cable splices;<br \/>- Presence in the DC section of surge arresters<br \/>external to the inverter that are unsuitable (trigger voltage<br \/>reduced compared to the characteristics of the generator strings<br \/>PV) or damaged;<br \/>- Presence of moisture inside the<br \/>field cabinet, if any  <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Make an insulation resistance measurement usinga megohmeter placed between the PV array (terminalpositive shorted to the negative pole) versus ground. Themeasurement is strongly influenced by environmental conditions soshould be made under the same conditions under which the error hasoccurred.- Should the measured value be less than 1megaohma check by a technician\/installer should be made on thePV generator to locate and eliminate the problem.- Should the measured value be greater than 1megaohmand the error report continues to be present, contactthe Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-04795ce ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Make an insulation resistance measurement using<br \/>a megohmeter placed between the PV array (terminal<br \/>positive shorted to the negative pole) versus ground. The<br \/>measurement is strongly influenced by environmental conditions so<br \/>should be made under the same conditions under which the error has<br \/>occurred.<br \/>- Should the measured value be less than 1megaohm<br \/>a check by a technician\/installer should be made on the<br \/>PV generator to locate and eliminate the problem.<br \/>- Should the measured value be greater than 1megaohm<br \/>and the error report continues to be present, contact<br \/>the Service STI Repair. <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E026\"\n\t\tclass=\"elementor-repeater-item-73b6e45 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E026<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Vref Error\"\n\t\tclass=\"elementor-repeater-item-d02bcd6 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Vref Error<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-94bf4de ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Internal reference voltage out of range:Inverter internal reference voltage measurementincorrect\"\n\t\tclass=\"elementor-repeater-item-b33f9b8 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Internal reference voltage out of range:<\/strong><br \/>Inverter internal reference voltage measurement<br \/>incorrect<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- If the problem (after a power down and restartof the inverter) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-22f73ee ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- If the problem (after a power down and restart<br \/>of the inverter) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E027\"\n\t\tclass=\"elementor-repeater-item-5b6892c ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E027<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Error Meas V\"\n\t\tclass=\"elementor-repeater-item-bbfd34d ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Error Meas V<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-95ede39 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Line voltage out of range:Error in internal line voltage measurement (setby standard) to have redundancy of measurement(2 measurements on the same parameter made bytwo different circuits)\"\n\t\tclass=\"elementor-repeater-item-3d72cf5 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Line voltage out of range:<\/strong><br \/>Error in internal line voltage measurement (set<br \/>by standard) to have redundancy of measurement<br \/>(2 measurements on the same parameter made by<br \/>two different circuits)<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- If the problem (after a power down and restartof the inverter) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-8974cbb ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- If the problem (after a power down and restart<br \/>of the inverter) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E028\"\n\t\tclass=\"elementor-repeater-item-d82f871 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E028<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Error Meas F\"\n\t\tclass=\"elementor-repeater-item-75a7283 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Error Meas F<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-ba39f3b ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Mains frequency out of range:Error in internal measurement of mains frequency (setby standard) to have redundancy of measurement(2 measurements on the same parameter made bytwo different circuits)\"\n\t\tclass=\"elementor-repeater-item-af9500c ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Mains frequency out of range:<\/strong><br \/>Error in internal measurement of mains frequency (set<br \/>by standard) to have redundancy of measurement<br \/>(2 measurements on the same parameter made by<br \/>two different circuits)<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- If the problem (once the inverter has been turned off and back on) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-d91bb39 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- If the problem (once the inverter has been turned off and back on<br \/>) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E029\"\n\t\tclass=\"elementor-repeater-item-5d409b2 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E029<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Mid Bulk OV\"\n\t\tclass=\"elementor-repeater-item-2b01d1a ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Mid Bulk OV<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-cc46d56 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Internal overvoltage on \"Mid bulk\" measurement:Internal inverter error (three-phase models only)\"\n\t\tclass=\"elementor-repeater-item-f7a67a1 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Internal overvoltage on \"Mid bulk\" measurement:<\/strong><br \/>Internal inverter error (three-phase models only)<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- If the problem (once the inverter has been turned off and back on) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-7a3b7c8 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- If the problem (once the inverter has been turned off and back on<br \/>) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E030\"\n\t\tclass=\"elementor-repeater-item-fa2dd69 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E030<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Error Meas Ileak\"\n\t\tclass=\"elementor-repeater-item-2590b68 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Error Meas Ileak<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-ec76f19 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"High leakage current (DC side):Error in the internal measurement (made when the inverteris connected to the grid) of the leakage current of theDC (PV generator) side with respect to ground (imposed by regulation)to have redundancy of the measurement (2measurements on the same parameter made by two different circuits)\"\n\t\tclass=\"elementor-repeater-item-b7abfb2 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>High leakage current (DC side):<\/strong><br \/>Error in the internal measurement (made when the inverter<br \/>is connected to the grid) of the leakage current of the<br \/>DC (PV generator) side with respect to ground (imposed by regulation)<br \/>to have redundancy of the measurement (2<br \/>measurements on the same parameter made by two different circuits<br \/>)<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- If the problem (after a power down and restartof the inverter) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-8995dba ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- If the problem (after a power down and restart<br \/>of the inverter) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E031\"\n\t\tclass=\"elementor-repeater-item-82fd24c ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E031<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Error Read V\"\n\t\tclass=\"elementor-repeater-item-c81a1f1 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Error Read V<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-7b3a2ff ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Output relay damaged:Internal voltage measurement at the ends of the output relayout of range. There is too much voltage difference betweenthe input and output of the grid connection relay.\"\n\t\tclass=\"elementor-repeater-item-0f8e401 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Output relay damaged:<\/strong><br \/>Internal voltage measurement at the ends of the output relay<br \/>out of range. There is too much voltage difference between<br \/>the input and output of the grid connection relay. <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- If the problem (after a power down and restartof the inverter) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-72e0931 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- If the problem (after a power down and restart<br \/>of the inverter) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E032\"\n\t\tclass=\"elementor-repeater-item-818ea6e ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E032<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Error Read I\"\n\t\tclass=\"elementor-repeater-item-7f889d3 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Error Read I<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-eee171b ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Unbalanced output currents:Measurement of output voltage unbalance (madebetween the three phases) out of range (only in three-phase models)\"\n\t\tclass=\"elementor-repeater-item-9d9ea41 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Unbalanced output currents:<\/strong><br \/>Measurement of output voltage unbalance (made<br \/>between the three phases) out of range (only in three-phase models)<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- If the problem (after a power down and restartof the inverter) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-fd080d9 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- If the problem (after a power down and restart<br \/>of the inverter) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E033\"\n\t\tclass=\"elementor-repeater-item-785ffb8 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E033<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"UTH\"\n\t\tclass=\"elementor-repeater-item-7b2a4ff ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>UTH<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-aa0b3ca ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Low ambient temperature:Temperature outside the inverter less than -25\u00b0C\"\n\t\tclass=\"elementor-repeater-item-3766a86 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Low ambient temperature:<\/strong><br \/>Temperature outside the inverter less than -25\u00b0C<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Wait for the temperatures to which the inverter is exposed to returnto the operating range.- If the problem persists, contact Service STI Repair.Remember to wait a necessary amount of time to allowthe inverter to warm up.\"\n\t\tclass=\"elementor-repeater-item-40b7f5b ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Wait for the temperatures to which the inverter is exposed to return<br \/>to the operating range.<br \/>- If the problem persists, contact Service STI Repair.<br \/>Remember to wait a necessary amount of time to allow<br \/>the inverter to warm up.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E034\"\n\t\tclass=\"elementor-repeater-item-39c577c ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E034<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Interlock fail\"\n\t\tclass=\"elementor-repeater-item-726754d ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Interlock fail<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-5fd2ded ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"\"IGBT\" circuitry not ready:Internal inverter error.\"\n\t\tclass=\"elementor-repeater-item-9113ba0 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>\"IGBT\" circuitry not ready:<\/strong><br \/>Internal inverter error.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- If the problem (after a power down and restartof the inverter) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-d4047dd ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- If the problem (after a power down and restart<br \/>of the inverter) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E035 (not shown on display)\"\n\t\tclass=\"elementor-repeater-item-fb503eb ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E035 <strong>(not shown on display)<\/strong><\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Remote Off\"\n\t\tclass=\"elementor-repeater-item-598ac31 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Remote Off<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-6b2cc44 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Inverter waiting for \"remote ON\" command:The inverter has been turned off remotely (remote OFF) and remainsin a state of waiting for the signal that will turn it back on(Remote ON)\"\n\t\tclass=\"elementor-repeater-item-944fbc4 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Inverter <strong>waiting for \"remote ON\" command:<\/strong><br \/>The inverter has been turned off remotely (remote OFF) and remains<br \/>in a state of waiting for the signal that will turn it back on<br \/>(Remote ON)<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Turn the inverter back on remotely. If the unit does not turn back on,disable the power off\/on function fromremote and perform a total shutdown of the equipment anda subsequent restart.- If the problem (once the Remote ON\/OFF function is reactivated from the display) persists contact Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-a573d29 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Turn the inverter back on remotely. If the unit does not turn back on,<br \/>disable the power off\/on function from<br \/>remote and perform a total shutdown of the equipment and<br \/>a subsequent restart.<br \/>- If the problem (once the Remote ON\/<br \/>OFF function is reactivated from the display) persists contact Service STI Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E036\"\n\t\tclass=\"elementor-repeater-item-770ada9 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E036<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Vout Avg errror\"\n\t\tclass=\"elementor-repeater-item-691c209 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Vout Avg errror<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-9aa01a3 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Average of grid voltage measurements out of range:The average value of the grid voltage (sampled every10 minutes) is outside the permissible ranges. The voltage ofgrid at the point connected to the inverter is too high. Thismay be caused by too high a grid impedance.In the final phase of the timout, the inverter limits power tocheck if the grid voltage stabilizes in the regularparameters. If this does not happen the inverter will disconnectfrom the grid\"\n\t\tclass=\"elementor-repeater-item-60a45e6 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Average of grid voltage measurements out of range:<\/strong><br \/>The average value of the grid voltage (sampled every<br \/>10 minutes) is outside the permissible ranges. The voltage of<br \/>grid at the point connected to the inverter is too high. This<br \/>may be caused by too high a grid impedance.<br \/>In the final phase of the timout, the inverter limits power to<br \/>check if the grid voltage stabilizes in the regular<br \/>parameters. If this does not happen the inverter will disconnect<br \/>from the grid   <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Check the grid voltage at the point where the inverter is connected.- If the grid voltage deviates from the range due to conditionsof the distribution grid, request an adjustment of thegrid voltage from the operator. If the operator authorizes a changeto the inverter parameters agree the new limits with the Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-0b2b0fd ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Check the grid voltage at the point where the inverter is connected.<br \/>- If the grid voltage deviates from the range due to conditions<br \/>of the distribution grid, request an adjustment of the<br \/>grid voltage from the operator. If the operator authorizes a change<br \/>to the inverter parameters agree the new limits with the Service STI Repair. <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E037\"\n\t\tclass=\"elementor-repeater-item-121c707 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E037<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Low Rice\"\n\t\tclass=\"elementor-repeater-item-fe805dc ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Low Rice<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Red led\"\n\t\tclass=\"elementor-repeater-item-d33e149 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Red led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Low insulation resistor value (only with \"Amorphous\" mode enabled):This error can only occur if the\"Amorphous\" mode is enabled. This function is enabledonly in inverters equipped with a grounding kit and is used tomonitor the voltage at the ends of the grounding resistor.The error occurs when the voltage at the endsof the collagated resistor between ground and generator polePV exceeds 30V for more than 30 minutes or 120Vfor more than one second.\"\n\t\tclass=\"elementor-repeater-item-ecb8ffb ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Low insulation resistor value (only with \"Amorphous\" mode enabled):<\/strong><br \/>This error can only occur if the<br \/>\"Amorphous\" mode is enabled. This function is enabled<br \/>only in inverters equipped with a grounding kit and is used to<br \/>monitor the voltage at the ends of the grounding resistor.<br \/>The error occurs when the voltage at the ends<br \/>of the collagated resistor between ground and generator pole<br \/>PV exceeds 30V for more than 30 minutes or 120V<br \/>for more than one second. <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Verify the presence and correct contacting of the two terminalsof the grounding resistor installed inside the inverter- Make an insulation resistance measurement usinga megohmeter placed between the PV array (terminalpositive shorted to the negative pole) with respect to ground. Themeasurement is strongly influenced by environmental conditions soshould be made under the same conditions under which the erroroccurred.- If the measured value should be less than 1megaohma check by a technician\/installer should be made on thePV generator to identify and eliminate the problem.- If the measured value should be greater than 1megaohmand the error report continues to be present, contactthe Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-2a03b3e ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Verify the presence and correct contacting of the two terminals<br \/>of the grounding resistor installed inside the inverter<br \/>- Make an insulation resistance measurement using<br \/>a megohmeter placed between the PV array (terminal<br \/>positive shorted to the negative pole) with respect to ground. The<br \/>measurement is strongly influenced by environmental conditions so<br \/>should be made under the same conditions under which the error<br \/>occurred.<br \/>- If the measured value should be less than 1megaohm<br \/>a check by a technician\/installer should be made on the<br \/>PV generator to identify and eliminate the problem.<br \/>- If the measured value should be greater than 1megaohm<br \/>and the error report continues to be present, contact<br \/>the Service STI Repair. <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E046\"\n\t\tclass=\"elementor-repeater-item-dc6f75a ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E046<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"String selftest fail\"\n\t\tclass=\"elementor-repeater-item-4b2361b ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>String selftest fail<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"No Led\"\n\t\tclass=\"elementor-repeater-item-7d20cdb ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>No Led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Error during automaticstringvoltage check(only in models with \"fuse-control\" board):In some inverter models, it is possible to carry out thetest by verifying the polarity of the strings connected to the input(Ex:TRIO-20.0\/27.6kW).This error is signaled when, duringthe test phase, an inverted string is detected\"\n\t\tclass=\"elementor-repeater-item-dc9d41a ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Error during automatic<\/strong><strong>string<\/strong><strong>voltage check<\/strong><br \/><strong>(only in models with \"fuse-control\" board):<\/strong><br \/>In some inverter models, it is possible to carry out the<br \/>test by verifying the polarity of the strings connected to the input<br \/>(Ex:TRIO-20.0\/27.6kW).<br \/>This error is signaled when, during<br \/>the test phase, an inverted string is detected<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Disconnect the inverter and verify the polarity of the string\/stringswhich the inverter has detected as reversed.- Once all strings have been properly connected carry outcommissioning again; the inverter will again checkthe correct polarity of the string inputs at the end ofwhich will carry out checks for grid connection.- If the problem (once a power off and onof the inverter has been carried out) persists contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-ce1c311 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Disconnect the inverter and verify the polarity of the string\/strings<br \/>which the inverter has detected as reversed.<br \/>- Once all strings have been properly connected carry out<br \/>commissioning again; the inverter will again check<br \/>the correct polarity of the string inputs at the end of<br \/>which will carry out checks for grid connection.<br \/>- If the problem (once a power off and on<br \/>of the inverter has been carried out) persists contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E049\"\n\t\tclass=\"elementor-repeater-item-d602510 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E049<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"AC FF Error\"\n\t\tclass=\"elementor-repeater-item-d60330d ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>AC FF Error<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-1c73316 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Error in the \"AC feed-forward\" circuit part:Internal inverter error\"\n\t\tclass=\"elementor-repeater-item-2e323f7 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Error in the \"AC feed-forward\" circuit part:<\/strong><br \/>Internal inverter error<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- If the problem (after a power down and restartof the inverter) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-2f31fe9 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- If the problem (after a power down and restart<br \/>of the inverter) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E056\"\n\t\tclass=\"elementor-repeater-item-af82dd2 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E056<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Over Temp. (fromexternal box)\"\n\t\tclass=\"elementor-repeater-item-16b82e3 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Over Temp. (from<br \/>external box)<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-41e60d0 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Excessive temperature measured inside the inverter wiring box:High internal temperature.This error is related to the temperature measured onexternal box (Ex:TRIO-20.0\/27.6kW)\"\n\t\tclass=\"elementor-repeater-item-53dc60a ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Excessive temperature measured inside the inverter wiring box:<\/strong><br \/>High internal temperature.<br \/>This error is related to the temperature measured on<br \/>external box (Ex:TRIO-20.0\/27.6kW)<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Make sure that the inverter is not exposed to direct sunlight.Wait until the temperatures to which the inverter is exposed returnto the operating range and the inverter is able to cool down.- If the problem (once the ambient temperature hasreturned to the range) persists, contact Service STI Repair. Remember to wait a necessary amount of time to allowthe inverter to cool down\"\n\t\tclass=\"elementor-repeater-item-6d465b3 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Make sure that the inverter is not exposed to direct sunlight.<br \/>Wait until the temperatures to which the inverter is exposed return<br \/>to the operating range and the inverter is able to cool down.<br \/>- If the problem (once the ambient temperature has<br \/>returned to the range) persists, contact Service STI Repair. Remember to wait a necessary amount of time to allow<br \/>the inverter to cool down <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E057\"\n\t\tclass=\"elementor-repeater-item-defcee1 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E057<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Vbulk reading error\"\n\t\tclass=\"elementor-repeater-item-d2d44bb ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Vbulk reading error<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-46a3666 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Input voltage (Vin) greater than theboostervoltage(Vbulk):The error occurs if the input voltage exceeds theBulk voltage (voltage on the DC-DC circuit partinside the inverter)\"\n\t\tclass=\"elementor-repeater-item-8f7b5e3 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Input voltage (Vin) greater than the<\/strong><br \/><strong>booster<\/strong><strong>voltage<\/strong><strong>(Vbulk):<\/strong><br \/>The error occurs if the input voltage exceeds the<br \/>Bulk voltage (voltage on the DC-DC circuit part<br \/>inside the inverter)<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- It is necessary to measure the input voltageinside the inverter with a voltmeter.- If it turns out to be higher than the maximum voltage of theoperating range, the alarm is real and it is necessary to check theconfiguration of the PV generator. If the voltage has exceededeven the maximum input threshold, the inverter may bedamaged.- If it turns out to be lower than the maximum voltage of the operationalrange, it is an alarm induced by an internalmalfunction and it is necessary to contact Service STI Repair.\"\n\t\tclass=\"elementor-repeater-item-5548eb9 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- It is necessary to measure the input voltage<br \/>inside the inverter with a voltmeter.<br \/>- If it turns out to be higher than the maximum voltage of the<br \/>operating range, the alarm is real and it is necessary to check the<br \/>configuration of the PV generator. If the voltage has exceeded<br \/>even the maximum input threshold, the inverter may be<br \/>damaged.<br \/>- If it turns out to be lower than the maximum voltage of the operational<br \/>range, it is an alarm induced by an internal<br \/>malfunction and it is necessary to contact Service STI Repair. <\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t<tr>\t<td data-order=\"E058\"\n\t\tclass=\"elementor-repeater-item-52973e5 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>E058<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Pin vs Pout check error\"\n\t\tclass=\"elementor-repeater-item-c364156 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Pin vs Pout check error<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Yellow led\"\n\t\tclass=\"elementor-repeater-item-55bbdf8 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>Yellow led<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"Error in Pin vs Pout control:The error occurs if the difference between the measured value of input power and output power is greater than the limit value set internally in the inverter.\"\n\t\tclass=\"elementor-repeater-item-e3b6ae5 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p><strong>Error in Pin vs Pout control:<\/strong><br \/>The error occurs if the difference between the measured value of input power and output power is greater than the limit value set internally in the inverter.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t\t<td data-order=\"- Error internal to the inverter and not externally verifiable.- If the problem (once the inverter has been turned off and back on) persists, contact STI Service Repair.\"\n\t\tclass=\"elementor-repeater-item-604c026 ekit_table_data_\">\n\t\t\n\t\t\t<div\n\t\t\t\tclass=\"ekit_table_body_container ekit_table_data_ ekit_body_align_left\">\n\t\t\t\t<p>- Error internal to the inverter and not externally verifiable.<br \/>- If the problem (once the inverter has been turned off and back on<br \/>) persists, contact STI Service Repair.<\/p>\n\t\t\t<\/div>\n\n\t\t\t\t<\/td>\n\t <\/tbody><\/table><\/div>\n\n\n\n<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-3f03e66 elementor-widget-divider--view-line elementor-widget elementor-widget-divider\" data-id=\"3f03e66\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"divider.default\">\n\t\t\t\t\t\t\t<div class=\"elementor-divider\">\n\t\t\t<span class=\"elementor-divider-separator\">\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"<p>\u2713 PVI 3.0\u2713 PVI 3.6\u2713 PVI 4.2\u2713 PVI 5000\u2713 PVI 6000\u2713 PVI 10.0\u2713 PVI 12.5\u2713 TRIO 5.8\u2713 TRIO 7.5\u2713 TRIO 8.5\u2713 TRIO 20.0\u2713 TRIO 27.6 POWER ONE STRING Home Error Code Photovoltaic Aurora Power One String Listed below are the requirements for initial action on a failed inverter. Before proceeding with any operation: A) Verify [&hellip;]<\/p>\n","protected":false},"author":3,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-13914","page","type-page","status-publish","hentry"],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v27.4 (Yoast SEO v27.4) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>STI Repair &#183; Error Codes<\/title>\n<meta name=\"description\" content=\"If your AURORA POWER ONE inverter has a display message and you need to understand the meaning here is the error message table.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/stirepair.com\/en\/aurora_power_one_string_error_codes\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Aurora Power One String Error Codes\" \/>\n<meta property=\"og:description\" content=\"\u2713 PVI 3.0\u2713 PVI 3.6\u2713 PVI 4.2\u2713 PVI 5000\u2713 PVI 6000\u2713 PVI 10.0\u2713 PVI 12.5\u2713 TRIO 5.8\u2713 TRIO 7.5\u2713 TRIO 8.5\u2713 TRIO 20.0\u2713 TRIO 27.6 POWER ONE STRING Home Error Code\" \/>\n<meta property=\"og:url\" content=\"https:\/\/stirepair.com\/en\/aurora_power_one_string_error_codes\/\" \/>\n<meta property=\"og:site_name\" content=\"STI Repair\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/it-it.facebook.com\/sticompany\/\" \/>\n<meta property=\"article:modified_time\" content=\"2026-03-18T15:05:09+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/stirepair.com\/wp-content\/uploads\/2024\/03\/Aurora_Power_One_Stringa.webp\" \/>\n\t<meta property=\"og:image:width\" content=\"389\" \/>\n\t<meta property=\"og:image:height\" content=\"670\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/webp\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"27 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/stirepair.com\\\/en\\\/aurora_power_one_string_error_codes\\\/\",\"url\":\"https:\\\/\\\/stirepair.com\\\/en\\\/aurora_power_one_string_error_codes\\\/\",\"name\":\"STI Repair &#183; Error Codes\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/stirepair.com\\\/en\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/stirepair.com\\\/en\\\/aurora_power_one_string_error_codes\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/stirepair.com\\\/en\\\/aurora_power_one_string_error_codes\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/stirepair.com\\\/wp-content\\\/uploads\\\/2024\\\/03\\\/Aurora_Power_One_Stringa.webp\",\"datePublished\":\"2024-03-08T16:08:28+00:00\",\"dateModified\":\"2026-03-18T15:05:09+00:00\",\"description\":\"If your AURORA POWER ONE inverter has a display message and you need to understand the meaning here is the error message table.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/stirepair.com\\\/en\\\/aurora_power_one_string_error_codes\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/stirepair.com\\\/en\\\/aurora_power_one_string_error_codes\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/stirepair.com\\\/en\\\/aurora_power_one_string_error_codes\\\/#primaryimage\",\"url\":\"https:\\\/\\\/stirepair.com\\\/wp-content\\\/uploads\\\/2024\\\/03\\\/Aurora_Power_One_Stringa.webp\",\"contentUrl\":\"https:\\\/\\\/stirepair.com\\\/wp-content\\\/uploads\\\/2024\\\/03\\\/Aurora_Power_One_Stringa.webp\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/stirepair.com\\\/en\\\/aurora_power_one_string_error_codes\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/stirepair.com\\\/en\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Aurora Power One String Error Codes\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/stirepair.com\\\/en\\\/#website\",\"url\":\"https:\\\/\\\/stirepair.com\\\/en\\\/\",\"name\":\"STI Repair\",\"description\":\"Riparazione Inverter\",\"publisher\":{\"@id\":\"https:\\\/\\\/stirepair.com\\\/en\\\/#organization\"},\"alternateName\":\"STI\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/stirepair.com\\\/en\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/stirepair.com\\\/en\\\/#organization\",\"name\":\"STI Repair\",\"url\":\"https:\\\/\\\/stirepair.com\\\/en\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/stirepair.com\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.stirepair.com\\\/wp-content\\\/uploads\\\/2022\\\/11\\\/STI_Repair.png\",\"contentUrl\":\"https:\\\/\\\/www.stirepair.com\\\/wp-content\\\/uploads\\\/2022\\\/11\\\/STI_Repair.png\",\"width\":512,\"height\":512,\"caption\":\"STI Repair\"},\"image\":{\"@id\":\"https:\\\/\\\/stirepair.com\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/it-it.facebook.com\\\/sticompany\\\/\",\"https:\\\/\\\/it.linkedin.com\\\/showcase\\\/stirepair\"]}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"STI Repair &#183; Error Codes","description":"If your AURORA POWER ONE inverter has a display message and you need to understand the meaning here is the error message table.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/stirepair.com\/en\/aurora_power_one_string_error_codes\/","og_locale":"en_US","og_type":"article","og_title":"Aurora Power One String Error Codes","og_description":"\u2713 PVI 3.0\u2713 PVI 3.6\u2713 PVI 4.2\u2713 PVI 5000\u2713 PVI 6000\u2713 PVI 10.0\u2713 PVI 12.5\u2713 TRIO 5.8\u2713 TRIO 7.5\u2713 TRIO 8.5\u2713 TRIO 20.0\u2713 TRIO 27.6 POWER ONE STRING Home Error Code","og_url":"https:\/\/stirepair.com\/en\/aurora_power_one_string_error_codes\/","og_site_name":"STI Repair","article_publisher":"https:\/\/it-it.facebook.com\/sticompany\/","article_modified_time":"2026-03-18T15:05:09+00:00","og_image":[{"width":389,"height":670,"url":"https:\/\/stirepair.com\/wp-content\/uploads\/2024\/03\/Aurora_Power_One_Stringa.webp","type":"image\/webp"}],"twitter_misc":{"Est. reading time":"27 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/stirepair.com\/en\/aurora_power_one_string_error_codes\/","url":"https:\/\/stirepair.com\/en\/aurora_power_one_string_error_codes\/","name":"STI Repair &#183; Error Codes","isPartOf":{"@id":"https:\/\/stirepair.com\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/stirepair.com\/en\/aurora_power_one_string_error_codes\/#primaryimage"},"image":{"@id":"https:\/\/stirepair.com\/en\/aurora_power_one_string_error_codes\/#primaryimage"},"thumbnailUrl":"https:\/\/stirepair.com\/wp-content\/uploads\/2024\/03\/Aurora_Power_One_Stringa.webp","datePublished":"2024-03-08T16:08:28+00:00","dateModified":"2026-03-18T15:05:09+00:00","description":"If your AURORA POWER ONE inverter has a display message and you need to understand the meaning here is the error message table.","breadcrumb":{"@id":"https:\/\/stirepair.com\/en\/aurora_power_one_string_error_codes\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/stirepair.com\/en\/aurora_power_one_string_error_codes\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/stirepair.com\/en\/aurora_power_one_string_error_codes\/#primaryimage","url":"https:\/\/stirepair.com\/wp-content\/uploads\/2024\/03\/Aurora_Power_One_Stringa.webp","contentUrl":"https:\/\/stirepair.com\/wp-content\/uploads\/2024\/03\/Aurora_Power_One_Stringa.webp"},{"@type":"BreadcrumbList","@id":"https:\/\/stirepair.com\/en\/aurora_power_one_string_error_codes\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/stirepair.com\/en\/"},{"@type":"ListItem","position":2,"name":"Aurora Power One String Error Codes"}]},{"@type":"WebSite","@id":"https:\/\/stirepair.com\/en\/#website","url":"https:\/\/stirepair.com\/en\/","name":"STI Repair","description":"Riparazione Inverter","publisher":{"@id":"https:\/\/stirepair.com\/en\/#organization"},"alternateName":"STI","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/stirepair.com\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/stirepair.com\/en\/#organization","name":"STI Repair","url":"https:\/\/stirepair.com\/en\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/stirepair.com\/en\/#\/schema\/logo\/image\/","url":"https:\/\/www.stirepair.com\/wp-content\/uploads\/2022\/11\/STI_Repair.png","contentUrl":"https:\/\/www.stirepair.com\/wp-content\/uploads\/2022\/11\/STI_Repair.png","width":512,"height":512,"caption":"STI Repair"},"image":{"@id":"https:\/\/stirepair.com\/en\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/it-it.facebook.com\/sticompany\/","https:\/\/it.linkedin.com\/showcase\/stirepair"]}]}},"_links":{"self":[{"href":"https:\/\/stirepair.com\/en\/wp-json\/wp\/v2\/pages\/13914","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/stirepair.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/stirepair.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/stirepair.com\/en\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/stirepair.com\/en\/wp-json\/wp\/v2\/comments?post=13914"}],"version-history":[{"count":2,"href":"https:\/\/stirepair.com\/en\/wp-json\/wp\/v2\/pages\/13914\/revisions"}],"predecessor-version":[{"id":19314,"href":"https:\/\/stirepair.com\/en\/wp-json\/wp\/v2\/pages\/13914\/revisions\/19314"}],"wp:attachment":[{"href":"https:\/\/stirepair.com\/en\/wp-json\/wp\/v2\/media?parent=13914"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}